LEORX Nema 17 2 Phase 4-Wire 1.5A 40mm 1.8° Stepper Motor for 3D Printer

Deal: $16.89 (SAVE Now!)

as of 09/26/2020 (Details)


Description This item is a stepper motor, with 4 pin cable for convenient use, suitable for 17HD34008-22B mixing type stepping motor. Necessary replacement for 3D printer. Features - 1m wire to connect an electrical machine, on the other hand has several optional connections; To prevent shrink tubing effect that the wire gets tangled up D-shaped shaft with 22mm, electric machine with high torque and high speed, low noise. - Suitable for mixing 17HD40005-22B stepper motor. - Drive mode: Hack wave constant current drive. - Exciting mode: two-phase 4-wire. It is available for the rotation of the forward and reverse. Specifications - Ambient temperature: -20 50 ℃ - RH: 90% max - Mounting position: shaft horizontal or vertical installation - DC winding resistance (25 ℃): 1.6 Ω ± 10% - Wnding Inductance: 3.2mH ± 20% - Cogging torque: 18mN.m REF - Holding torque: ≥ 360mN.m (I = 1.3A) - Max Blank switching frequency: ≥ 1400pps - Max Idle Frequenc :. ≥ 8000pps - Temperature rise: lt;80 K - Step angle accuracy: 1.8 ° ± 5% - Rotational inertia: 57g.cm 2 - Motor Weight: 0.28 kg / pcs REF - Insulation resistance: Cold insulation resistance should be more than 100 mOhm (between the motor stator and terminal) - Dielectric strength: The space between the motor stator and terminal should withstand able AC600V / 1s without degradation. Leakage current of less than 1 mA. - Size (L * W * H): ca. 42 * 42 * 40mm / 1.65 * 1.65 * 1.57 inch Package Including 1 * Nema 17 2 Phase 4-Wire 1.5A 40mm 1.8° Stepper Motor for 3D Printer 1 * Cable

Do you want ot get the LEORX Nema 17 2 Phase 4-Wire 1.5A 40mm 1.8° Stepper Motor for 3D Printer?

Learn more

Deals