sara-u Current to Voltage Module 0/4-20mA to 0-3.3V 5V 10V Voltage Transmitter

Deal: $3.32 (SAVE Now!)

as of 10/27/2020 (Details)


Instructions for use:1. Module according to the definition of wiring, power supply voltage 7-36V (if the output to 10V, the supply voltage must be greater than 12V)2. After power-up, the D2 indicator should be on, otherwise check the line connection. Board with reverse protection, reverse does not burn.3. When the current input is the minimum (0mA or 4mA), adjust the ZERO potentiometer so that the VOUT output is the minimum (0.0V or other voltage)4. When the current input is at maximum (20mA), adjust the SPAN potentiometer so that the VOUT output is the maximum (3.3V or 5V or 10V, the output can be as low as 2.5V when the input is 4-20ma)According to your needs, through the jumper cap to select the appropriate range:4--20ma: 0-2.5V range: J1 1,2 feet short, 3,4 feet shorted                  0 - 3.3V range: J1 1,2 feet off, 3,4 feet off                  0 - 5.0V range: J1 1,2 feet short, 3,4 feet shorted                  0--10.0V range: J1 1,2 feet short, 3,4 feet off0--20ma: 0--3.3V range: J1 1,2 feet short, 3,4 feet shorted                  0 - 5.0V range: J1 1,2 feet short, 3,4 feet shorted                  0--10.0V range: J1 1,2 feet short, 3,4 feet offSize: 4.2x2.5cm/1.65x0.98inchQuantity: 1 PcNote:Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bidDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Contents: 1 Pc x Current To Voltage Module

Do you want ot get the sara-u Current to Voltage Module 0/4-20mA to 0-3.3V 5V 10V Voltage Transmitter?

Learn more

Deals